Worst is when the soapy water rises above your ankles after you take a bath. It can be frustrating when you try to use a plunger and it doesn’t work. Or Liquid Plumber, which doesn’t seem to work either.
Worst is when your feet are exposed to soapy water after you have taken a shower.
It can be frustrating when a plunger doesn’t work or a liquid plumber doesn’t. You will also need to wait until a plumber or drain guy arrives, especially if you are a handyman. We will also address some of the most frequently asked questions regarding shower drain repair & odors. We know you have a lot to do, so let’s get started. You will need tools
- Dry/wet shop vacuum
- Flashlight
- Use paper towels
- Rags
- Channel lock / pliers
- 4-in-1 screwdriver
- Small bucket
- Rubber gloves
- Long, flat screwdriver
Steps
First, drain the water from the shower pan with your shop vacuum. Next, remove the top drain cover. Make sure you don’t remove the top of the screw. If necessary, use WD40. Third, you can use your flashlight to check the drain for any debris. It should look exactly like the video above. The fourth step is to secure the vacuum against the drain’s top and remove any debris. To stir the things up, you may need to use a long flat screwdriver. Then, use the vacuum once more. Turn the water on, test it and then run the water for 2 minutes with hot water. If the clog was located above the P trap at this point, then you have it.
Tip: If water is backing up, it’s likely that the clog is deeper down. At this point, a roto rooter cable may be required. If the issue is really, consider contacting a water damage restoration brentwood expert that can solve your issue.
What is the average cost of plumbers and drain cleaning companies?
Los Angeles has a range of prices ranging from $34 to $225. Clearing drains costs an average of $89 for soft stopspages and $189 if you need more severe compaction. You can check around to see if there are any of our competitors that charge very low prices. But be careful, they may have other motives than selling you something. When it comes to repairs, we always recommend a second opinion.
How do I know if my shower drain pipe is broken?
These are some of the signs:
- Sewer odors
- Water seepage/Leakage from slab, ceiling or crawl space
- Very slow drainage
- Mold growth around flooring or base molding
- You clear the clogs and it will come back days later.
What happens if my shower drain is broken?
Today’s drain technology gives us more options than when we started our Plumbing business back in 1982. We can either do the direct lining or coat the line with epoxy. Or, in the worst case, we can repair the line manually.
Los Angeles: How Much Does a Shower Drain Repair Cost?
Cost is influenced by several factors. Cost increases can be caused by difficult access, depth, distance, how long the pipe has to be broken, and how much concrete or pan must be removed. You can expect to pay between $350-$3,200 on average.
Can a Drain Camera Detect the Break?
However, there are restrictions to passing the P-trap. This is often a great way of diagnosing drain problems.
My shower drains well, but I have a horrible smell?
There are many factors that can cause this. The inner pipe walls may be compacted and off gassing biofilm. If you have lived in your home since the 1970s, this is a sign that it needs to be cleaned out. Over years of use, the original cast iron pipe can accumulate a lot of dirt and buildup.
Conclusion
With these 5 quick steps, you can clear your shower drain. Contact the 911 Restoration SFV if you require a second opinion. You can find more about them here.
